Home
Accessories for Surface Finish

Filters

Bowers (1)
Diavite (20)
GAR (1)
MHC (1)
Mitutoyo (141)
Rubert (20)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (217)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (9)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)

Accessories for Surface Finish

225 products

Showing 37 - 72 of 225 products

Display

Sort by

View

Rubert R-316 Cylindrical Grinding Comparator Description : Rubert Cylindrical Grinding Comparator Number of patches : 8 Range of Roughness Ra Microns : 0.025 3.2 microns Range of roughness Rz in microns : 0.25-16 microns N-groups : 1-8

Rubert Rubert R-316 Cylindrical Grinding Comparator Description : Rubert Cylindrical Grinding Comparator Number of patches : 8 Range of Roughness Ra Microns : 0.025 3.2 microns Range of roughness Rz in microns : 0.25-16 microns N-groups : 1-8

Sale price€86.00

Rubert R-120 Cylindrical Turning Comparator Description : Rubert Cylindrical Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Rubert Rubert R-120 Cylindrical Turning Comparator Description : Rubert Cylindrical Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Sale price€275.00

Rubert R-119 Face Turning Description : Rubert Face Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Rubert Rubert R-119 Face Turning Description : Rubert Face Turning Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 16-2000 micro" Range of roughness Ra in microns : 0.4-50.0 microns N-groups : 5-12

Sale price€275.00

Rubert R-115 Surface Grinding Comparator Description : Rubert Surface Grinding Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 1-125 micro" Range of roughness Ra in microns : 0.025-3.2 microns N-groups : 1-8

Rubert Rubert R-115 Surface Grinding Comparator Description : Rubert Surface Grinding Comparator Number of patches : 8 Range of Roughness Ra Micro Inch : 1-125 micro" Range of roughness Ra in microns : 0.025-3.2 microns N-groups : 1-8

Sale price€275.00

Rubert Rubert 542X sinusoidal specimen Ra = 0.06 µm = 2.36 µ in

Sale price€400.00

Rubert Rubert 530E sinusoidal specimen Ra = 1.0 ìm Description : sinusoidal specimen Ra = 1.0 μm

Sale price€374.00

Rubert Rubert 504E Random surface finish gauge Description : Random profile specimen Ra = 0.15 μm

Sale price€513.00

Rubert Rubert 501E random profile specimen Description : Random profile specimen Ra = 0.02 μm

Sale price€468.00

Mitutoyo Calibration Stage for Surftest SJ/SV, Contracer, Formtracer Item number: 12AAG175

Sale price€393.98

Mitutoyo Mitutoyo Calibration Stand - 12AAM100

Sale price€1,409.64

Mitutoyo Mitutoyo 998291 Precision V-block for XY levelling table (workpiece ø1 - ø160 mm)

Sale price€942.17

Mitutoyo Mitutoyo Cross-travel Table (mm) - 218-041

Sale price€2,510.00

Mitutoyo Mitutoyo 178-016 Levelling Table

Sale price€749.00

Mitutoyo Mitutoyo Cross-travel Table (mm) -- Table top: 280x180mm, XY travel: 100x50mm 218-001

Sale price€2,350.00

Mitutoyo Mitutoyo Digital Levelling Table (mm) - 178-042-1

Sale price€3,650.00

Mitutoyo Mitutoyo 178-053-1 XY levelling table 1 x 1" (tilting: ±1.5°, max. loading: 15 kg, swivelling: ±3°

Sale price€2,830.00

Mitutoyo Mitutoyo Three-Axis Adjustment Table - 178-047

Sale price€4,330.00

Mitutoyo Mitutoyo 178-043-1 XY levelling table (25 x 25 mm) (tilting: ±1.5°, max. loading: 15 kg, swivelling: ±3°)

Sale price€2,830.00

Mitutoyo Mitutoyo Three-Axis Adjustment Table - 178-047

Sale price€4,330.00

Mitutoyo Roughness specimen Ra 1µm [inch/mm] 178-606

Sale price€322.89

Mitutoyo Roughness specimen Ra 1µm [mm] 178-605

Sale price€650.60

Mitutoyo Roughness specimen Ra 0,4 / Ra 3µm [mm] 178-604

Sale price€375.90

Mitutoyo Printer set for SJ-210 with cable and battery 178-421D

Sale price€1,325.30

Mitutoyo Detector 4mN for Surftest; Formtracer SV-C 178-397-2

Sale price€991.57

Mitutoyo Low Pressure Detector for SJ201/301 (0.75mN) 178-395

Sale price€701.20

Mitutoyo Detector for soft materials 10µm; 4mN for SJ-210 / SJ-310 series 178-391

Sale price€701.20

Mitutoyo Standard detector 5µm; 4mN for SJ-210 / SJ-310 series 178-390

Sale price€701.20

Mitutoyo Std.Detector For Suf.501 178-380

Sale price€1,337.35

Mitutoyo Leveling Table Leveling range +/- 1,5° 178-195

Sale price€848.19

Mitutoyo Vibration isolator wide base 178-189

Sale price€15,228.92

Mitutoyo Vibration isolator standard base 178-188

Sale price€11,433.73

Mitutoyo Digimatic XY travel+leveling table[inch] Travel +/-0,5"; Leveling range +/-1,5° 178-186

Sale price€3,072.29

Mitutoyo Digimatic XY travel + leveling table[mm] Travel +/-12,5mm; Leveling range +/-1,5° 178-185

Sale price€2,734.94

Mitutoyo travel + leveling table [inch] Travel +/-0,5"; Leveling range +/-1,5° 178-184 XY

Sale price€2,746.99

Mitutoyo XY travel + leveling table [mm] Travel +/-12,5mm; Leveling range +/-1,5° 178-183

Sale price€3,204.82

Mitutoyo Side table 178-181

Sale price€3,590.36

123 4…7

Page 2 / 7Next

Filters (0)

Filters

Bowers (1)
Diavite (20)
GAR (1)
MHC (1)
Mitutoyo (141)
Rubert (20)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (217)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (9)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)