Home
Accessories for Surface Finish

Filters

Bowers (1)
Diavite (20)
GAR (1)
MHC (1)
Mitutoyo (141)
Rubert (20)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (217)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (9)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)

Accessories for Surface Finish

225 products

Showing 109 - 144 of 225 products

Display

Sort by

View

Mitutoyo 2 x Roling circle waviness stylus R0,8mm; for Surftest; Formtracer SV-C 12AAE884

Sale price€422.89

Mitutoyo Standard stylus - R250µm; 60° for Surftest; Formtracer SV-C 12AAE883

Sale price€913.25

Mitutoyo Standard stylus - R1µm; 60° for Surftest; Formtracer SV-C 12AAE882

Sale price€1,184.34

Mitutoyo Nosepiece w.stylus limit 12AAC867

Sale price€351.81

Mitutoyo Nose Piece for Knife Edge (SV2000/3000) 12AAC756

Sale price€209.64

Mitutoyo Narrow Groove Nosepiece SV2000/3000 12AAC755

Sale price€226.51

Mitutoyo Small Hole Nosepiece SV- 2000/3000 12AAC754

Sale price€228.92

Mitutoyo 3 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC741

Sale price€389.16

Mitutoyo Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740

Sale price€389.16

Mitutoyo Eccentric stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC739

Sale price€389.16

Mitutoyo Knife edge stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC738

Sale price€337.35

Mitutoyo Deep groove 30mm stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC737

Sale price€427.71

Mitutoyo Deep groove 20mm stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC736

Sale price€226.51

Mitutoyo Deep groove 10mm stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC735

Sale price€226.51

Mitutoyo Extra Small Hole Stylus/Tip Angle 60 Deg for Surftest; Formtracer SV-C 12AAC734

Sale price€337.35

Mitutoyo Extra small hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC733

Sale price€380.72

Mitutoyo Small hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC732

Sale price€277.11

Mitutoyo Standard stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC731

Sale price€221.69

Mitutoyo 3 x Deep hole stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB426

Sale price€448.19

Mitutoyo 2 x Deep hole stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB425

Sale price€438.55

Mitutoyo Eccentric stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB424

Sale price€438.55

Mitutoyo Knife edge stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB423

Sale price€378.31

Mitutoyo Gear tooth stylus - R10µm; 60° for Surftest; Formtracer SV-C 12AAB422

Sale price€236.14

Mitutoyo Deep groove 10mm stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB421

Sale price€236.14

Mitutoyo Deep groove 20mm stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB420

Sale price€236.14

Mitutoyo Deep groove 30mm stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB419

Sale price€486.75

Mitutoyo Ultra small hole stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB418

Sale price€378.31

Mitutoyo Extra small hole stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB417

Sale price€277.11

Mitutoyo Small hole stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB416

Sale price€277.11

Mitutoyo Standard stylus - R10µm; 90° for Surftest; Formtracer SV-C 12AAB415

Sale price€236.14

Mitutoyo 3 x Deep hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB414

Sale price€389.16

Mitutoyo 2 x Deep hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB413

Sale price€389.16

Mitutoyo Eccentric stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB412

Sale price€389.16

Mitutoyo Knife edge stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB411

Sale price€337.35

Mitutoyo Gear tooth stylus - R5µm; 60° for Surftest; Formtracer SV-C 12AAB410

Sale price€226.51

Mitutoyo Deep Groove Stylus 40mm 5um 12AAB409-40

Sale price€630.12

1 2 345 6 7

Page 4 / 7Next

Filters (0)

Filters

Bowers (1)
Diavite (20)
GAR (1)
MHC (1)
Mitutoyo (141)
Rubert (20)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (217)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (9)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)