Home
Accessories for Surface Finish

Filters

Bowers (1)
Diavite (20)
Mitutoyo (140)
Rubert (13)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (207)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (3)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)

Accessories for Surface Finish

215 products

Showing 73 - 108 of 215 products

Display

Sort by

View

Mitutoyo 2D Auto-Leveling Table for CNC Surftest and Formtracer 178-037

Sale price€4,462.50

Mitutoyo Device for measuring inside diameter for Surftest SJ-210 / SJ-310 178-035

Sale price€3,025.00

Mitutoyo Device as universal fixture for Surftest SJ-210 / SJ-310 178-034

Sale price€2,575.00

Mitutoyo Device for cylindrical workpieces for Surftest SJ-210 / SJ-310 178-033

Sale price€3,175.00

Mitutoyo Digital leveling unit for Surftest SJ-410 178-030

Sale price€2,687.50

Mitutoyo Connection cable for extension 1 m for Surftest SJ-210 12BAA303

Sale price€86.50

Mitutoyo 2 x Corner hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAM603

Sale price€483.75

Mitutoyo 2 x Corner hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAM601

Sale price€628.75

Mitutoyo RS-232C cable for printer for Surftest SJ-210 12AAL067

Sale price€96.00

Mitutoyo Ultra small hole stylus - R250µm for Surftest; Formtracer SV-C 12AAJ662

Sale price€635.00

Mitutoyo Extension rod 100mm for Surftest; Formtracer SV-C 12AAG203

Sale price€611.25

Mitutoyo Extension rod 50mm for Surftest; Formtracer SV-C 12AAG202

Sale price€491.25

Mitutoyo 2 x Small slotted hole stylus - R5µm; 90 for Surftest; Formtracer SV-C 12AAE940

Sale price€740.00

Mitutoyo 2 x Small slotted hole stylus - R2µm; 60 for Surftest; Formtracer SV-C 12AAE938

Sale price€840.00

Mitutoyo Standard stylus - R1µm; 90° for Surftest; Formtracer SV-C 12AAE924

Sale price€1,157.50

Mitutoyo Hole bottom stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAE915

Sale price€1,362.50

Mitutoyo 2 x Deep hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAE914

Sale price€646.25

Mitutoyo Deep groove 40mm stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAE911

Sale price€443.75

Mitutoyo 2 x Deep groove 30mm stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAE910

Sale price€443.75

Mitutoyo 2 x Small deep hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAE908

Sale price€528.75

Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAE898

Sale price€735.00

Mitutoyo 2 x Gear tooth stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAE896

Sale price€220.00

Mitutoyo Deep groove 40mm stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAE895

Sale price€220.00

Mitutoyo 2 x Deep groove 30mm stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAE894

Sale price€323.75

Mitutoyo 2 x Small deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAE892

Sale price€586.25

Mitutoyo 2 x Rolling circle waviness stylus R250µm; 60°; Surftest; Formtracer SV-C 12AAE886

Sale price€1,275.00

Mitutoyo 2 x Roling circle waviness stylus R0,8mm; for Surftest; Formtracer SV-C 12AAE884

Sale price€438.75

Mitutoyo Standard stylus - R250µm; 60° for Surftest; Formtracer SV-C 12AAE883

Sale price€947.50

Mitutoyo Standard stylus - R1µm; 60° for Surftest; Formtracer SV-C 12AAE882

Sale price€1,228.75

Mitutoyo Nosepiece w.stylus limit 12AAC867

Sale price€365.00

Mitutoyo Nose Piece for Knife Edge (SV2000/3000) 12AAC756

Sale price€217.50

Mitutoyo Narrow Groove Nosepiece SV2000/3000 12AAC755

Sale price€235.00

Mitutoyo Small Hole Nosepiece SV- 2000/3000 12AAC754

Sale price€237.50

Mitutoyo 3 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC741

Sale price€403.75

Mitutoyo Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740

Sale price€403.75

Mitutoyo Eccentric stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC739

Sale price€403.75

1 234 5 6

Page 3 / 6Next

Filters (0)

Filters

Bowers (1)
Diavite (20)
Mitutoyo (140)
Rubert (13)
Tesa (41)

Granite Products (3)
Software & Connectivity (2)
Surface Finish (207)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (3)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)