Home
Accessories for Surface Finish

Filters

Bowers (1)
Diavite (20)
GAR (1)
MHC (1)
Mitutoyo (141)
Rubert (20)
Tesa (1)

Granite Products (3)
Surface Finish (182)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (9)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)

Accessories for Surface Finish

185 products

Showing 145 - 180 of 185 products

Display

Sort by

View

Mitutoyo Deep Groove Stylus 40mm 5um 12AAB409-40

Sale price€630.12

Mitutoyo Deep groove 10mm stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB409

Sale price€226.51

Mitutoyo Deep groove 20mm stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB408

Sale price€226.51

Mitutoyo Deep groove 30mm stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB407

Sale price€427.71

Mitutoyo Ultra small hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB406

Sale price€337.35

Mitutoyo Extra small hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB405

Sale price€259.04

Mitutoyo Small hole stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB404

Sale price€259.04

Mitutoyo Standard stylus - R5µm; 90° for Surftest; Formtracer SV-C 12AAB403

Sale price€204.82

Mitutoyo Cylindrical measurement block for Surftest SJ-410 12AAB358

Sale price€196.39

Mitutoyo Standard nosepiece skidless for Surftest; Formtracer SV-C 12AAB355

Sale price€95.30

Mitutoyo Corner surface nosepiece for Surftest SJ-410, SJ-500 12AAB353

Sale price€204.82

Mitutoyo Seesaw type nosepiece for Surftest SJ-410, SJ-500 12AAB352

Sale price€267.47

Mitutoyo R-surface nosepiece for Surftest SJ-410, SJ-500 12AAB351

Sale price€259.04

Mitutoyo Nosepiece Narrow Groove 12AAB350

Sale price€196.39

Mitutoyo Deep groove 10mm nosepiece for Surftest SJ-410, SJ-500 12AAB349

Sale price€204.82

Mitutoyo Deep groove 20mm nosepiece for Surftest SJ-410, SJ-500 12AAB348

Sale price€204.82

Mitutoyo Extra-small hole nosepiece for Surftest SJ-410, SJ-500 12AAB347

Sale price€560.24

Mitutoyo Cylindrical surface nosepiece for Surftest SJ-410, SJ-500 12AAB345

Sale price€259.04

Mitutoyo Skid-attached nosepiece for Surftest SJ-410, SJ-500 12AAB344

Sale price€196.39

Mitutoyo Gear tooth stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAB339

Sale price€226.51

Mitutoyo Rolling circle waviness stylus R0,8mm; for Surftest; Formtracer SV-C 12AAB338

Sale price€226.51

Mitutoyo Deep groove 20mm stylus - R2µm; 60° for Surftest; Formtracer FTA, SV-C 12AAB336

Sale price€220.48

Mitutoyo Super Extra Small Hole Stylus 2um 12AAB334

Sale price€337.35

Mitutoyo Extra Small Hole Stylus 2um 12AAB333

Sale price€259.04

Mitutoyo Standard Stylus 2uM (90 degrees) 12AAB331

Sale price€204.82

Mitutoyo Height gauge adaptor [inch] for Surftest SJ-210 / SJ-310 12AAA233

Sale price€78.55

Mitutoyo Height gauge adaptor [mm] for Surftest SJ-210 / SJ-310 12AAA222

Sale price€78.55

Mitutoyo Adapter for magnetic stand; D8mm for Surftest SJ-210 / SJ-310 12AAA221

Sale price€41.57

Mitutoyo Adapter for magnetic stand; D9,5mm for Surftest SJ-210 / SJ-310 12AAA220

Sale price€41.57

Mitutoyo Adapter for vertical position for Surftest SJ-210 / SJ-310 12AAA219

Sale price€36.75

Mitutoyo Nosepiece for cylinder for SJ-210 / SJ-310 series 12AAA218

Sale price€114.94

Mitutoyo Nosepiece for flat surfaces for SJ-210 / SJ-310 series 12AAA217

Sale price€114.94

Mitutoyo Height adjustment feet for Surftest SJ-210 / SJ-310 12AAA216

Sale price€114.94

Mitutoyo Extension rod length 50mm for SJ-210 / SJ-310 series 12AAA210

Sale price€181.93

Mitutoyo Mitutoyo SJ-411 Standard Detector 4mN 178-397-2

Sale price€695.00

Mitutoyo Mitutoyo 178-612 Step gauge .002mm .010mm, .000079'', .0000394''

Sale price€585.54

1…3 456

Page 5 / 6Next

Filters (0)

Filters

Bowers (1)
Diavite (20)
GAR (1)
MHC (1)
Mitutoyo (141)
Rubert (20)
Tesa (1)

Granite Products (3)
Surface Finish (182)

Diavite AH-00/00/90/2 Axis and Knives Tracer to measure small axis, knives, edges and wires (1)
Diavite BH-00/00/60/2 Small Bore Tracer with 2µm Radius Diamond Stylus Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite BH-00/00/90/5 Small Bore Tracer (Maximum Depth 20mm Minimum Bore Diameter 2.5mm (1)
Diavite Measuring support aluminium, h=250 mm, 300x195 mm, MSHN-AL (1)
Diavite MSHN-HG Test Stand Granite h=250 mm, 300x195 mm (1)
Diavite MSHN-HG-500 Test Stand Granite h=500 mm, 300x195 mm (1)
Diavite NFH Slot Tracer NFH-25/10/90/5 Maximum Slot Depth 25mm Minimum Slot Width 1.5mm (1)
Diavite NH-15/00/90/5 Tracer for measuring slots up to 15mm deep (1)
Diavite SH-00/00/60/2 Tracer 2µm Radius Diamond Stylus Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Standard SH-00/00/90/5 Tracer 5µm Radius Stylus (supplied with DH8 VH/VHF) Maximum Depth 27mm Minimum Bore Diameter 8mm with Skid (1)
Diavite Tracer KKH with skid for concave/vex measurement, radius of the tip: 2 µm/60° for VH/VHF, Article code: KKH-08/10/60/2 (1)
Diavite Tracer KKH with skid, concave/vex surface, 4 mm, 5 µm/90° for VH/VHF, Article code: KKH-04/10/90/5 (1)
Diavite Tracer NH with skid for slot 15 mm, 2 µm/60° for VH/VHF, NH-15/00/60/2 (1)
Diavite Tracer TH with skid for depth measurement 130 mm, 5 µm/90° for VH/VHF, Article code: TH-130/10/90/5 (1)
Diavite Tracer UH with skid for circumference- and ball , 5 µm/90° for VH/VHF, Article code: UH-00/00/90/5 (1)
Diavite Tracer with skid for gear tooth flanks ZH, 5 µm/90°, Article code: ZH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QBH, 5 µm/90° for VH/VHF, Article code: QBH-00/00/90/5 (1)
Diavite Tracer with skid for transversal measurement QH, 5 µm/90° for VH/VHF, Article code: QH-00/00/90/5 (1)
Mitutoyo 2 x Deep hole stylus - R2µm; 60° for Surftest; Formtracer SV-C 12AAC740 (1)
tracer for concave and convex parts with a minimum radius of 5 mm irregular curvatures can also be measured the minimum lt and lc must be applied radius of the tip: standard 5 μm radius of skid: r = 1 mm do not use with the advance device down the use of a stand for the advance device is strongly ad... (1)
Tracer without skid NFH, bore measurement, X= 6 mm, 5 µm/90° for VHF only, NFH-06/10/90/5 (1)

Probe (1)
Standard (9)

Metric (1)
Inch (4)

[".001mm/.00005\""] (1)