Phynix 11021 Phynix Paint Thickness Gauge PaintCheck plus F. PaintCheck plus F is an easy to use coating thickness measurement gauge providing fast, non-destructive and accurate coating thickness measurements on iron/steel Measureing range iron/steel 0 -
Additional Details | Measuring range iron/steel =0 - 3.000 µm| Base material= iron/steel | Accuracy =± (3 µm + 5 % of value)| Resolution =0-1.000 µm: 1 µm / 1.000 - 2.500 µm: 2 µm| Calibration =Not neccessary: Factory calibration| Display =4-digit alphanumeric, height 8 mm| Operating temperature =0° C to + 60 °C| Surface temperature= -15 °C to + 60 °C| Dimensions (gauge) =110 mm x 50 mm x 25 mm| Weight= 90 g incl. batteries| Protection class =IP 52 (protection against dust and dripping water)| Standards= DIN, ISO, ASTM, BS| Recommended application= Paint thickness measurement| Warranty =2 years| |
---|
Phynix 11021 Paint Thickness Gauge PaintCheck plus F. PaintCheck plus F is an easy to use coating thickness measurement gauge providing fast, non-destructive and accurate coating thickness measurements on iron/steel Measureing range iron/steel 0 -
PaintCheck plus F is an easy to use coating thickness measurement gauge providing fast, non-destructive and accurate coating thickness measurements on iron/steel. The thickness of the coating layer provides information about the coating structure, repaintings and fillings. If the measured coating thickness exceeds the standard thickness or if the measurements vary, the use of filler material for repair work or repaintings is indicated.
Accident damages can easily be detected with PaintCheck plus F.
PaintCheck plus F operates with the proven magnetic inductive method of coating thickness measurement (DIN EN ISO 2178). It offers the highest degree of accuracy on thin coatings combined with an easy handling. Switch on and measure - it is as fast, easy and universal as it gets.
Application areas
- Car dealerships
- Second-hand car dealerships
- Paint shops
- Surveyors
- Oldtimer scene
Advantages at a glance
- Easy single button handling - switch on and measure!
- Fast and precise measurements
- Measurements on flat and slighty curvatured surfaces
- Calibration-free measurements
- For measurements on iron/steel
- Integrated probe for measurements on smooth, painted surfaces
- 4-digit alphanumeric display
- Large contact surface for safe positioning
- Acoustic signal after measurement
- Selectable µm/mils
- Automatic switch off function
Technical specifications PaintCheck plus F – 11021
Design | Integrated probe |
Measuring range iron/steel | 0 - 3.000 µm |
Base material | Steel/iron |
Accuracy | ± (3 µm + 5 % of value) |
Resolution | 0-1.000 µm: 1 µm / 1.000 - 2.500 µm: 2 µm / 2.500 - 3.000 µm: 5 µm |
Calibration | Not necessary: factory-calibration |
Display | 4-digit alphanumeric, height 8 mm |
Operating temperature | 0° C to + 60 °C |
Surface temperature | -15 °C to + 60 °C |
Dimensions (gauge) | 110 mm x 50 mm x 25 mm |
Weight | 90 g incl. batteries |
Protection class | IP 52 (protection against dust and dripping water) |
Standards | DIN, ISO, ASTM, BS |
Recommended application | Paint thickness measurement |
Warranty | 2 years |
Limit values
Smallest curvature radius for convex surfaces | 25 mm |
Smallest curvature radius for concave surfaces | 50 mm |
Smallest operation height | 125 mm |
Smallest measurement area | 40 x40 mm |
Smallest base material thickness – F | 0.75 mm |
Scope of delivery
Gauge PaintCheck plus F
Protective rubber cover
Control foil
Steel zero-standard
Carrying case
2 batteries AAA
Instruction manual