Phynix 11020 Phynix Paint Thickness Gauge PaintCheck plus FN Description : Paint thickness gauge for ferrous and non ferrous metals Base material iron/steel and non-ferrous metals Measuring range iron/steel 0 - 3.000 µm Base material Iron/steel and non-f
| Additional Details | Measureing range iron/steel =0 -3.000 µm| Base material= iron/steel and non-ferrous metals| Accuracy =± (3 µm + 5 % of value)| Resolution =0-1.000 µm: 1 µm / 1.000 - 2.500 µm: 2 µm| Calibration =Not neccessary: Factory calibration| Display =4-digit alphanumeric, height 8 mm| Operating temperature =0° C to + 60 °C| Surface temperature= -15 °C to + 60 °C| Dimensions (gauge) =110 mm x 50 mm x 25 mm| Weight= 90 g incl. batteries| Protection class =IP 52 (protection against dust and dripping water)| Standards= DIN, ISO, ASTM, BS| Recommended application= Paint thickness measurement| Warranty =2 years| |
|---|
Phynix 11020 Paint Thickness Gauge PaintCheck plus FN Description : Paint thickness gauge for ferrous and non ferrous metals Base material iron/steel and non-ferrous metals Measuring range iron/steel 0 - 3.000 µm Base material Iron/steel and non-f
PaintCheck plus FN is an easy to use paint thickness measurement gauge providing fast, non-destructive and accurate coating thickness measurements on steel and non-ferrous metals e.g. aluminum. The thickness of the coating layer provides information about the coating structure, repaintings and fillings. If the measured coating thickness exceeds the standard thickness or if the measurements vary, the use of filler material for repair work or repaintings is indicated.
Accident damages can easily be detected with PaintCheck plus FN.
PaintCheck plus FN provides two established methods of coating thickness measurement: the magnetic inductive and the eddy current method (DIN EN ISO 2178 und 2360). Both practices offer the highest degree of accuracy on thin coatings on steel, as well as on non-ferrous metals e.g. aluminum. The selection of the practice is made automatically when applying the probe. It is as fast, easy and universal as it gets.
Application areas
- Car dealerships
- Second-hand car dealerships
- Paint shops
- Surveyors
- Oldtimer scene
Advantages at a glance
- Easy single button handling - switch on and measure!
- Fast and precise measurements
- Measurements on flat and slighty curvatured surfaces
- Calibration-free measurements
- For measurements on iron/steel and non-ferrous metals
- Automatic recognition of the substrate
- Integrated probe for measurements on smooth, painted surfaces
- 4-digit alphanumeric display
- Large contact surface for safe positioning
- Acoustic signal after measurement
- Selectable µm/mils
- Automatic switch off function
Technical specifications PaintCheck plus FN – 11020
| Design | Integrated probe |
| Measuring range iron/steel | 0 - 3.000 µm |
| Base material | Iron/steel and non-ferrous metals |
| Accuracy | ± (3 µm + 5 % of value) |
| Resolution | 0-1.000 µm: 1 µm / 1.000 - 2.500 µm: 2 µm / 2.500 - 3.000 µm: 5 µm |
| Calibration | Not neccessary: factory calibrated |
| Display | 4-digit alphanumeric, height 8 mm |
| Operating temperature | 0° C to + 60 °C |
| Surface temperature | -15 °C to + 60 °C |
| Dimensions (probe) | 110 mm x 50 mm x 25 mm |
| Weight | 90 g incl. batteries |
| Protection class | IP 52 (protection against dust and dripping water) |
| Standards | DIN, ISO, ASTM, BS |
| Recommended application | Paint thickness measurement |
| Warranty | 2 years |
Limit values
| Smallest curvature radius for convex surfaces | 25 mm |
| Smallest curvature radius for concave surfaces | 50 mm |
| Smallest operation height | 125 mm |
| Smallest measurement area | 40 x40 mm |
| Smallest base material thickness – F | 0.75 mm |
| Smallest base material thickness – N | 0.25 mm |
Scope of delivery
Gauge PaintCheck plus FN
Protective rubber cover
Control foil
Steel zero-standard
Aluminum zero-standard
Carrying case
2 batteries AAA
Instruction manual
