Wyler 065-004-001 Levelmeter 2000
Item number:
065-004-001
Wyler 065-004-001 Levelmeter 2000
Availability:
In stock
Item number
065-004-001
€3,263.16
ex vat
€3,263.16
ex vat
The LEVELMETER 2000 is a
Display unit
Interface between Measuring instrument and PC
On LEVELMETER 2000 the following parameters may be set or changed:
Sensor address/port
Type of damping filter
Base length relative and many more
The LEVELMETER 2000 is fully interchangeable with the other ZEROTRONIC components. This means that the LEVELMETER can be exchanged if necessary by any other family type instrument. All the relevant data, such as Calibration data
Sensor address
ZERO point etc.
are stored at the respective sensor heads. Through the RS 232 port the measuring data may be transmitted to a PC/Laptop or to an other outlet as well as to the Measuring software LEVELSOFT of WYLER’s.
The measuring principle of the ZEROTRONIC family is based on a changing of the capacity of a condenser built of two electrodes and a pendulum in form of a shield installed in between. The measured change of capacity is directly influenced by the change of the inclination of the pendulum. This capacity change is the primarily used signal for the angle to be measured. The measuring system is designed to be completely antimagnetic. The basic signal received in the LEVELMETER 2000 will be computed into an angle by comparing the signal with a reference curve stored and then displayed in the required unit.
On LEVELMETER 2000 the following parameters may be set or changed:
Sensor address/port
Type of damping filter
Base length relative and many more
The LEVELMETER 2000 is fully interchangeable with the other ZEROTRONIC components. This means that the LEVELMETER can be exchanged if necessary by any other family type instrument. All the relevant data, such as Calibration data
Sensor address
ZERO point etc.
are stored at the respective sensor heads. Through the RS 232 port the measuring data may be transmitted to a PC/Laptop or to an other outlet as well as to the Measuring software LEVELSOFT of WYLER’s.
The measuring principle of the ZEROTRONIC family is based on a changing of the capacity of a condenser built of two electrodes and a pendulum in form of a shield installed in between. The measured change of capacity is directly influenced by the change of the inclination of the pendulum. This capacity change is the primarily used signal for the angle to be measured. The measuring system is designed to be completely antimagnetic. The basic signal received in the LEVELMETER 2000 will be computed into an angle by comparing the signal with a reference curve stored and then displayed in the required unit.
Wyler 065-004-001 Levelmeter 2000
