Wyler 016F110-122-001 BLUESYSTEM SIGMA Level with Radio. Base Type 122 Steel, hardened, contact surfaces flat, precision lapped, with dust grooves, remaining surfaces chromium plated , sensitivity 1μm/m, Flat Base 110mm, No Magnets, No Mounting Holes
Magnetic inserts | None |
---|---|
Limits of error full-scale | > 0.5 ME |
Storage temperature | - 30 ... + 70 °C |
Operating temperature | + 0 ... + 40 °C |
Settle time | ca.5 seconds |
Output | RS232 / RS485, asynchronous, 7 DataBits, 2 StopBits, no parity, 9600 bps |
Battery | 2 x 1.5 V Alkaline |
Housing | Cast iron rust protected |
Remark | Base Type 122 Steel, hardened, contact surfaces flat, precision lapped, with dust grooves, remaining surfaces chromium plated |
Measuring Range | ±20mm/m |
External Indicating Unit | 016F004-002 BlueMETER SIGMA with radio transmission optional extra |
Base Length Flat | 110mm |
Base Type | Base Type 122 Steel, hardened, contact surfaces flat, precision lapped, with dust grooves, remaining surfaces chromium plated |
Version | 122 |
Scope of delivery | 1 BlueLEVEL 2 batteries 1.5V, size C 1 Infrared remote control (IR Zapper Blue) 2 batteries 1.5V, size AAA 1 manual 1 case |
Responce Time | < 5 sec |
Part Number | 016F110-122-001 |
Model | BLUESYSTEM SIGMA |
SPC Output | Yes |
Radio | Radio module Bluetooth, Frequency ISM Band /2.4000....2.4835GHz |
Sensitivity | 1 μm/m 0.2 arcsec |
video |
Wyler 016F110-122-001 BLUESYSTEM SIGMA Level with Radio. Base Type 122 Steel, hardened, contact surfaces flat, precision lapped, with dust grooves, remaining surfaces chromium plated , sensitivity 1μm/m, Flat Base 110mm, No Magnets, No Mounting Holes
Wyler BlueSYSTEM Inclinometers
The BlueSYSTEM is a continuous further enhancement of the well known and well established measuring instruments MINILEVEL NT and LEVELTRONIC NT. A BlueSYSTEM normally consists of one or two measuring BlueLEVEL instruments and an indicating unit BlueMETER. Depending on the application, the BlueMETER can also be connected to a PC with evaluation software allowing the on-line SIGMA evaluation and presentation of the measured SIGMA values.
Features
• Compact design which is functionally optimised for precision measurement
• Radio data transmission based on the internationally approved Bluetooth™ standard (Option)
• Each instrument has its own specific address allowing the use of several independent systems in the same room without interfering with each other
• Since each instrument has a built in IR receiver, the measurement can be initiated from a distance
• Linearity according to DIN 2276
• All instruments are equipped with RS 232 / RS 422 / RS 485 interfaces
• Powered by standard 1.5 V batteries type "C"
• In compliance with CE regulations and all applicable EMC regulations