Tesa 00730049 Tesa Height Gauge TESA-µHITE Height Gauge, Range 100mm / 4 in. With 00760203 granite measuring table, 00730054 TESA-µHite electronic length unit
Item number:
00730503
| Type of Height Gauge | TESA-µHITE |
|---|---|
| Digital, Non-Digital | Digital |
| Height Gauge Range | 0-4"/0-100mm |
| Measurement units | Inch/Metric |
| SPC Output | Yes |
| Resolution | .001mm-.0005mm/.0001"-.00005" |
| IP Rating | IP54 |
| Height Accuracy | .00005"/.001mm |
| Additional Details | Description = Tesa- |
TESA-µHITE Height Gauge, Code 00730503 Range 100mm / 4 in. With 00760203 granite measuring table, TESA-µHite electronic length unit
Availability:
In stock
Item number
00730503
€5,333.00
ex vat
€5,333.00
ex vat
TESA-µHITE Height Gauge
The solution for the most varied metrology application
TESA-µHITE height gauge
provided with the following components;
1 TESA measuring support, granite measuring table, size 200 x 300 x 50 mm (00760203)
1 TESA-µHITE electronic length unit (00730503)
Compact design with measuring stand included - Sensor equipped with a system for coaxial measuring according to the Abbe principle or using an offset probe relative to the gauge axis. Measures internal, external, height, depth, step and distance dimensions on geometric elements having either a flat, parallel or cylindrical surface. - Automatic detection of the culminating point on bores or shafts - dynamic probing with memory functions «max.», «min.» «max.- min.». The whole system provides the best solution for measuring straightness, flatness and parallelism or inspecting axial and radial runouts depending on the chosen tool configuration.
Ideal for workpiece inspection close to the production area
100 mm measuring span.
0.001 mm and 0.0001 mm or 0.0001 in and 0.00001 in scales intervals
Max. perm. error as low as 2 µm (or 1µm when checking coaxiality).
Integrated temperature sensor so that the coefficient of linear expansion of each gauge unit matches that of steel ( 11,5 x 10-6 K-1 ).
Motorised measuring head for fast probing at each point.
Automatic value capture, controlled over the stability of the measuring force, but also all measured values.
Constant measuring force through the motor-driven actuator. Switchable.
No manualcalculation needed.
RS 232 data output with direct connection to TESA PRINTER SPC.
Memory capacity for 99 single values.
Accuracy
Position of the contact point relative to the axis of the measuring bolt.
- coaxial Max perm. errors limit devia.; 1.0µm (0.00005 in),
Repeatability limit.: 0.5µm (0.00002in)
- offset Max perm. errors limit devia.; 2.0µm (0.0001 in),
Repeatability limit.: 1.0µm (0.00004in)
Also included:
00730050 1 TESA-µHITE value sensor Range 100mm / 4 in
00760204 1 Control panel. To be connected to TESA-µHITE. Interval 0,001-0,0001 mm / 0.0001 - 0.00001 in
00760191 1 Connecting cable for TESA-µHITE to control panel
00760195 1 Axial insert holder with M2.5 thread
03510002 1 Insert with a 3 mm dia. tungsten carbide ball tip
00760197 1 Insert with a 5 mm dia. tungsten carbide ball tip, offset
00760192 1 Master piece for establishing probe constant, nominal dimension 10 mm / 0.39370
04761054 1 Mains adapter 110 to 240Vac/50 to 60 Hz
04761055 1 Cable EU for mains adapter
04761056 1 Cable US for mains adapter
038407 1 Suited plastic case
The solution for the most varied metrology application
TESA-µHITE height gauge
provided with the following components;
1 TESA measuring support, granite measuring table, size 200 x 300 x 50 mm (00760203)
1 TESA-µHITE electronic length unit (00730503)
Compact design with measuring stand included - Sensor equipped with a system for coaxial measuring according to the Abbe principle or using an offset probe relative to the gauge axis. Measures internal, external, height, depth, step and distance dimensions on geometric elements having either a flat, parallel or cylindrical surface. - Automatic detection of the culminating point on bores or shafts - dynamic probing with memory functions «max.», «min.» «max.- min.». The whole system provides the best solution for measuring straightness, flatness and parallelism or inspecting axial and radial runouts depending on the chosen tool configuration.
Ideal for workpiece inspection close to the production area
100 mm measuring span.
0.001 mm and 0.0001 mm or 0.0001 in and 0.00001 in scales intervals
Max. perm. error as low as 2 µm (or 1µm when checking coaxiality).
Integrated temperature sensor so that the coefficient of linear expansion of each gauge unit matches that of steel ( 11,5 x 10-6 K-1 ).
Motorised measuring head for fast probing at each point.
Automatic value capture, controlled over the stability of the measuring force, but also all measured values.
Constant measuring force through the motor-driven actuator. Switchable.
No manualcalculation needed.
RS 232 data output with direct connection to TESA PRINTER SPC.
Memory capacity for 99 single values.
Accuracy
Position of the contact point relative to the axis of the measuring bolt.
- coaxial Max perm. errors limit devia.; 1.0µm (0.00005 in),
Repeatability limit.: 0.5µm (0.00002in)
- offset Max perm. errors limit devia.; 2.0µm (0.0001 in),
Repeatability limit.: 1.0µm (0.00004in)
Also included:
00730050 1 TESA-µHITE value sensor Range 100mm / 4 in
00760204 1 Control panel. To be connected to TESA-µHITE. Interval 0,001-0,0001 mm / 0.0001 - 0.00001 in
00760191 1 Connecting cable for TESA-µHITE to control panel
00760195 1 Axial insert holder with M2.5 thread
03510002 1 Insert with a 3 mm dia. tungsten carbide ball tip
00760197 1 Insert with a 5 mm dia. tungsten carbide ball tip, offset
00760192 1 Master piece for establishing probe constant, nominal dimension 10 mm / 0.39370
04761054 1 Mains adapter 110 to 240Vac/50 to 60 Hz
04761055 1 Cable EU for mains adapter
04761056 1 Cable US for mains adapter
038407 1 Suited plastic case
Tesa 00730503Tesa Height Gauge TESA-µHITE Height Gauge, Range 100mm / 4 in. With 00760203 granite measuring table, TESA-µHite electronic length unit
