Mitutoyo 178-565-02E SJ210S Description : SJ210S Traverse Tracing type With S drive Model Stylus type : 4mN ,

Item number:
178-565-02E
Details
Model SJ-210S
Part Number 178-565-02E
Measuring Speed Measuring: 0.01, 0.02, 0.03 in/s (0.25mm/s, 0.5mm/s, 0.75mm/s) Returning: 1mm/s
Drive Unit Transverse tracing type (178-233-2)
Detector 4mN type (178-386)
Stylus tip radius 5µm
Detector measuring force 4mN
Detector range 360µm (-200µm to +160µm)
External I/O USB I/F. Digital output, Printer output, RS-232C I/F, Foot SW I/F
Data storage Memory card
Detector Conical taper angle 90º
Skid force Less than 400mN
Applicable standards JIS ’82 / JIS ’94 / JIS ’01 / ISO ’97 / ANSI / VDA
Assessed profiles Primary profile / Roughness profile / DF profile / Roughness profile-Motif
Evaluation parameters Ra, Rc, Ry, Rz, Rq, Rt, Rmax, Rp, Rv, R3z, Rsk, Rku, RPc, Rsm, Rmax, Rz1max, S, HSC, RzJIS, Rppi, R∆a, R∆q, Rlr, Rmr, Rmr(c), Rδc, Rk, Rpk, Rvk, Mr1, Mr2, A1, A2, Vo, Rpm, tp, Htp, R, Rx, AR, Possible Customize
Analysis graphs Bearing area curve / Amplitude distribution curve
Filters Gaussian, 2CR75, PC75
Cut off length 0.003, 0.01, 0.03, 0.1" (0.08 , 0.25 , 0.8 , 2.5mm) 100, 300µin (2.5 , 8µm) or none
Sampling length 0.003, 0.01, 0.03, .1 " (0.08 , 0.25 , 0.8 , 2.5mm)
Number of Sampling lengths ×1,×2,×3,×4,×5,×6,×7,×8,×9,×10, Arbitrary 0.01~.63" (.0001"interval) [(0.3~16.0mm: 0.01mm interval)]
LCD dimensions 1.45 x 1.93" (36.7×48.9 mm)
Standard accessories 12BAA303 Connecting cable *4 178-606 Roughness specimen (Ra 1.00µm) 12AAE643 Point-contact adapter 12AAE644 V-type adapter 12BAK699 Carrying case 12BAK700 Calibration stage 12BAK820 Protective sheets for display AC Adapter, Operation manual Quick referenc
Measuring range X axis 5.6 mm (.22inch)
Measuring Range Z Axis 14200 µin (-7900µin~+6300µin) / 360µm (-200µm ~ +160µm)
Range / Resolution 14170µin /.8µin (360µm / 0.02µm), 4000µin / .2µin (100µm / 0.006µm),1000µin /.08µin (25µm / 0.002µm)
video

SJ-210 Portable Surface Roughness Tester

Mitutoyo 178-561-11E SJ210 Description : Mitutoyo SJ-210 Surface Finish Gauge Stylus type : 0.75mN Stylus Tip .002mm radius

Mitutoyo 178-561-11E SJ210 Description : Mitutoyo SJ-210 Surface Finish Gauge Stylus type : 0.75mN Stylus Tip .002mm radius

Mitutoyo 178-565-01E SJ210S  Description : SJ210S Traverse Tracing type With S drive Model  Stylus type : 0.75mN ,

Mitutoyo 178-565-01E SJ210S Description : SJ210S Traverse Tracing type With S drive Model Stylus type : 0.75mN ,

Mitutoyo 178-565-02E SJ210S Description : SJ210S Traverse Tracing type With S drive Model Stylus type : 4mN ,

Availability: In stock
Item number
178-565-02E
€3,847.06 ex vat
€3,847.06 ex vat

Surftest SJ-210 Portable Surface Roughness Tester

A portable surface roughness tester able to operate independently of mains power and make measurements on almost any part of a workpiece of practically any size. The 2.4-inch colour graphic back-lit LCD provides excellent readability and an intuitive display that is easy to use. Operation is by keys on the front of the unit and under the sliding cover. Up to 10 measurement conditions and one measured profile can be stored in the internal memory. An optional memory card can be used as an extended memory to store large quantities of measured surface profiles and setup conditions. Access to each feature can be protected to prevent unintended operation. An alarm warns when the stylus should be checked for wear. Complies with the applicable international standards concerning definition and calculation of the values of surface roughness parameters. In addition to calculation results, sectional calculation results and assessed profiles, bearing curves, and amplitude distribution curves can be displayed.

 

The Surftest SJ-210 is available in 6 variations

Model No. Drive Unit Detector
SJ-210 Standard Type 0.75mN type
SJ-210 Standard Type 4mN type
SJ-210 Retractable Type 0.75mN type
SJ-210 Retractable Type 4mN type
SJ-210 Transverse type 0.75mN type
SJ-210 Transverse type 4mN type

 

  • The 2.4 inch colour graphic LCD provides excellent readability and an intuitive display that's easy to negotiate. The LCD also includes a backlight for improved visibilty in dark environments.
  • The Surftest SJ-210 can be operated easily using the keys on the front of the unit and under the sliding cover.
  • Up to 10 measurement conditions and one measured profile can be stored in the internal memory.
  • An optional memory card can be used as an extended memory to store large quantities of measured profiles and conditions.
  • Access to each feature can be password protected, which prevents unintended operations and allows you to protect your settings.
  • The display interface supports 16 languages, which can be freely switched.
  • An alarm warns you when the cumulative measurement distance exceeds a preset limit.
  • The surftest SJ-210 complies with the following standards: JIS (JIS-B0601-2001, JIS-B0601-1994, JIS BO601-1982), VDA, ISO-1997 and ANSI.
  • In addition to calculation results, the Surftest SJ-210 can display sectional calculation results and assessed profiles, load curves, and amplitude distribution curves.
Mitutoyo 178-565-02E SJ210S Description : SJ210S Traverse Tracing type With S drive Model Stylus type : 4mN ,
€3,847.06 ex vat
Product Accessories