Mitutoyo 050001 Center line Gauge for Calipers
Item number:
050001
| Additional Details | Code= 050001| Description= For Calipers, 4'', 6'' & 8''| |
|---|
Mitutoyo 050001 Center line Gauge for Calipers, 4'', 6'' & 8''
Availability:
In stock
Item number
050001
€55.84
ex vat
€55.84
ex vat
Pairs of conical probes are specially designed for Digimatic, Dial and Vernier calipers to quickly measure centerline distances.
Due to the fact that the smaller attachment is .375" in diameter, and that the conical points are .375" apart when closed, the centerline gages do not measure distances less than .375" when the caliper is closed with the attachment installed.
The centerline distance is read directly off the caliper without a conversion factor.
Each probe has two small holding bolts and the attachment is supplied with an Allen wrench.
The probes are black oxide finished, and arequite durable for the required measurements.
The 60° conical probe snugly fits into the holes, and takes guesswork away from center distance measurements.
*For 4, 6 and 8" Calipers
Due to the fact that the smaller attachment is .375" in diameter, and that the conical points are .375" apart when closed, the centerline gages do not measure distances less than .375" when the caliper is closed with the attachment installed.
The centerline distance is read directly off the caliper without a conversion factor.
Each probe has two small holding bolts and the attachment is supplied with an Allen wrench.
The probes are black oxide finished, and arequite durable for the required measurements.
The 60° conical probe snugly fits into the holes, and takes guesswork away from center distance measurements.
*For 4, 6 and 8" Calipers
Mitutoyo 050001 Center line Gauge for Calipers
