Heidenhain MT2581 Heidenhain probe Description : Heidenhain Metro probe with with 1Vpp signal Range : 25mm/1 Measuring Standard : DIADUR phase grating on Zerodur glass ceramic; grating period 4 μm System accuracy :
Item number:
MT2581
| Additional Details | Description = Heidenhain Metro probe with with 1Vpp signal|Range = 25mm/1|Measuring Standard = DIADUR phase grating on Zerodur glass ceramic; grating period 4 μm|System accuracy = |
|---|
Heidenhain MT2581 Heidenhain probe Description : Heidenhain Metro probe with with 1Vpp signal Range : 25mm/1 Measuring Standard : DIADUR phase grating on Zerodur glass ceramic; grating period 4 μm System accuracy :
Availability:
In stock
Item number
MT2581
€1,807.20
ex vat
€1,807.20
ex vat
Incremental length gauges from HEIDENHAIN offer high accuracy over long measuring ranges.
These sturdily made gauges are available in application-oriented versions.
They have a wide range of applications in production metrology in multipoint inspection stations measuring equipment monitoring and as position measuring devices
B= Ball bearing guides
P= Pneumatic Actuation
W= Dust & Splashproof Heidenhain Incremental Length Gages play a role in incoming inspection production SPC quality assurance; anywhere fast reliable and accurate length measurement is needed. Their large measuring lengths are a particular advantage with ranges available up to 4" (100mm). Certo length gages are especially well suited to tasks such as gage-block inspection & calibration small-diameter Specto length gages are typically used in multi-point inspection and position measurement. The similarly compact Metro length gages are for higher accuracy applications. Heidenhain - Certo digital length gages offer an accuracy up to +/- .000001" (.00003mm) Heidenhain - Metro digital length gages have accuracy grades as fine as +/- .000008" (.0002mm) Heidenhain - Specto digital length gages feature accuracy of +/- .000040" (.001mm)
Name MT 2581
Measuring standard DIADUR phase grating on Zerodur® glass ceramic, grating period 4 µm
Measuring lengths 25 mm
Incremental signals 1 VPP
Signal period 2 µm
Power supply 5 V DC ± 5 %
Max. traversing speed 30 m/min
Required moving force 0.1 N to 0.6 N(depending on operating attitude)
Vibration 55 to 2000 Hz ≤ 100 m/s² (IEC 60068-2-6)
Shock (11 ms) ≤ 1000 m/s² (EN 60 068-2-27)
Operating temperature 10 to 40 °C, ref. temperature 20 °C
Protection IEC 60529 IP 50
Weight 180 g
Reference marks Approx. 1.7 mm below upper stop
Recommended measuring step 0.1 µm / 0.05 µm
Application Exact measuring stations, Inspection equipment
Plunger actuation By cable or measured object
Position of plunger at rest Extended
System accuracy ± 0.2 µm
Permissible radial force ≤ 0.5 N
Operating attitude Any
Fastening Face
vertically_downward -/- /0.75 N
Vertically upward 1 N/1.25 N/1.75 N
Horizontal /0.75 N/1.25 N
