Elektro Physic 80-130-0200 Paint Thickness Gauge Description : Models 720 with built-in integrated probe F-sensors for measurement on steel and N-sensors for measurement on non-ferrous substrates

Item number:

80-130-0200

Skip to the beginning of the images gallery

Details
video
Additional Details	Description= Combination Gauge Measures F & N \| Sensor model 720 =built-in\| Number of data memories =10\| Number of storable readings =max. 10,000 readings in total\| Statistics =Number of readings, minimum, maximum, average, standard deviation, coefficient of variation, block statistics (norm-conforming/free configurable)\| Calibration procedures= according to international norms and standards\| Calibration=Factory calibration, Zero calibration, 2-point and 3-point calibration, user adjustable offset value\| Monitoring of limits =Visual and audible alarm to indicate limit deviations\| Measuring units =μm, mm, cm; mils, inch, thou\| Operating temperature =-10 °C - 60 °C/14 °F - 140 °F\| Storing temperature =-20 °C - 70 °C/-4 °F - 158 °F\| Data port =IrDA 1.0 (infrared)\| Power supply =2 Mignon/AA batteries\| Norms and standards =DIN EN ISO 1461, 2064, 2178, 2360, 2808, 3882, 19840 ASTM B244, B499, D7091, E376 AS 3894.3, SS 1841 60, SSPC-PA 2\| Dimensions =157 mm x 75.5 mm x 49 mm; 6.2” x 2.97” x 1.93”\| Weight built-in/external =approx. 175 g; 6.2 oz\| FN1.5 Probe=Measuring range F: 0…1.5 mm/60 mils/ Range N: 0…0.7 mm, 27 mils\| Typical field of application=small samples, thin coatings, use with measuring stand\| Measuring principle=magnetic induction/Eddie Current\| Accuracy=± (1 μm + 0.75% of reading)\| Repeatability=± (0,5 μm + 0.5% of reading)\| Low range resolution=0.05 μm; .002 mils\| Minimum curvature radius convex=1,0 mm; .040”\| Minimum curvature radius concave (external sensor without prism)=7.5 mm; .30”\| Minimum curvature radius concave (built-in sensor)2=30 mm; 1.20”\| Minimum measuring area=Ø 5 mm; .20”\| Minimum substrate thickness=F: 0.3 mm; .012”/N : 40 μm; .0016”\| Measuring rate in continuous mode=20 readings per second\| Max. measuring rate in single readings mode=70 readings per minute\|

Elektro Physic MikroTest-5-Manual Banana Gauge MikroTest Range : 0

Elektro Physic 06-007-0007 Paper roll for MiniPrint 7000

Elektro Physic 80-130-0200 Paint Thickness Gauge Description MiniTest 720 FN 1.5 with built-in integrated probe F-sensors for measurement on steel and N-sensors for measurement on non-ferrous substrates

Be the first to review this product

Availability: In stock

Item number

80-130-0200

€1,196.40 ex vat

MiniTest 700
Applications

Non-destructive measurement of:
non-magnetic coatings e.g. paint enamel chrome on steel
insulating coatings e.g. paint and anodizing coatings on non-ferrous metals

Performance features

High precision coating thickness measurement up to 15 mm / 600 mils
Increased accuracy and reproducibility achieved by sensor integrated digital signal processing (SIDSP)
Universal probe with automatic substrate detection allows fast measurement on steel and non ferrous metals
Wear resistant probes of practically unlimited lifetime
Optimized temperature compensation
High precision characteristic curves with up to 50 data points
Storage for up to 100000 values
User interface with up to 25 languages
Infrared data transmission (IrDA) to PC and printer

Models
MiniTest 720
Integrated sensor
10 data memories
Storage for up to 10000 values

MiniTest 730
External probe
10 data memories
Storage for up to 100000 values

MiniTest 740
External or integrated probe
100 data memories
Storage for up to 100000 values
Measuring principle
Magnetic induction and eddy current principle according to ISO 2808