Elektro Physic 80-124-0201 MiniTest 650 FN (with probe FN) incl. statistics and USB interface,data transfer software and soft carrying case
Item number:
80-124-0201
| Additional Details | Type =ElektroPhysik 80124-0201 MiniTest 650 FN (with probe FN Dual Sensor) incl. statistics and USB interface, data transfer software and soft carrying case | Range=0 … 2000 μm / 80 mils| Measuring uncertainty=± (2 % of reading + 2 μm) / ± (2 % of reading + 0.08 mils)| Minimum curvature radius =5 mm / 0.2“ convex 25 mm / 1“ concave | Minimum measuring area =Ø 20 mm / 0.8“| Minimum base thickness: =0.5 mm / 20 mils (F) 50 μm / 2 mils (N)| Display 4-digit screen data =(11 mm / 0.44”) | Measuring units μm – mils user =selectable| Calibration standard, =1-point and 2-point calibration| Statistics =calculated from maximum 9.999 readings, mean value, standard deviation, number of readings, minimum and maximum| Interface =USB| Power supply =3 Micro AAA batteries (for more than 10,000 readings)| Dimensions and weight housing: =70 mm x 122 mm x 32 mm / 2.7” x 4.8” x 1.26” sensor: Ø 15 mm x 62 mm / Ø 0.60” x 2.44”; 225 grams / 7.93 ozs| Temperature gauge:= 0 to 50 °C / 32 ° to 122 °F sensor: –10 ° to 70 °C / 14 ° to 158 °F? |
|---|
ElektroPhysik 80-124-0201 MiniTest 650 FN (with probe FN) incl. statistics and USB interface,data transfer software and soft carrying case
Availability:
In stock
Item number
80-124-0201
€1,186.55
ex vat
€1,186.55
ex vat
Elektro-Physik MikroTest 6 Automatic Coating Thickness Gauges
The Coating Thickness Testing Gauge for Testing Coatings on Steel
Automatic operation means that the operator tensions the scale on the gauge, which has a special tension spring built into it and the gauge controls the entire measurement process, after the magnet is set on the surface. The special tension spring applies a pull-off force to the magnet until the magnet lifts off the coating, at which time the scale stops turning and locks the scale automatically. The thickness can be read of the scale.
Features:
Tests all coatings on steel, e.g. paints, powder coating, enamels, chrome, zinc...
Increased repeatability
Measures at any angle
No power supply is required
A coating thickness gauge for quick, precise
and non-destructive measurement of:
•electroplating
•nickel coatings
•phosphating
•paint
•plastic
•enamel etc. on steel
No power supply
No calibration
Measurement at any angle
Fully automatic
The Coating Thickness Testing Gauge for Testing Coatings on Steel
Automatic operation means that the operator tensions the scale on the gauge, which has a special tension spring built into it and the gauge controls the entire measurement process, after the magnet is set on the surface. The special tension spring applies a pull-off force to the magnet until the magnet lifts off the coating, at which time the scale stops turning and locks the scale automatically. The thickness can be read of the scale.
Features:
Tests all coatings on steel, e.g. paints, powder coating, enamels, chrome, zinc...
Increased repeatability
Measures at any angle
No power supply is required
A coating thickness gauge for quick, precise
and non-destructive measurement of:
•electroplating
•nickel coatings
•phosphating
•paint
•plastic
•enamel etc. on steel
No power supply
No calibration
Measurement at any angle
Fully automatic
Elektro Physic 80-124-0201 MiniTest 650 FN (with probe FN) incl. statistics and USB interface,data transfer software and soft carrying case
