CLINOTRONIC PLUS is a small and convenient inclination measuring instrument, which provides excellent and reproducible values.
Thanks to its wide measuring range of ±45°, combined with 4 measuring bases, the whole range of 360° can be covered.
This instrument is very versatile: It can be used for antenna construction, car-industry (camber and spoiler), machine tool industry (adjustment of machine parts), train identification systems, medical (computer tomography), road construction, air plane construction (propellers) etc.

Thanks to its convenient size, the instrument can be used everywhere in the workshop or in the field.
The software LabEXCEL Clino (which can be downloaded from the WYLER homepage for free) allows the easy recording of measuring data.
Together with the CLINOMASTER a constant accuracy can be ensured.

The following measuring ranges are available:
measuring range of ±10°
Calibration / Built-in software 21 setting points manual 25 factory-set calibration points
Settling time / Value available after < 2 Seconds
Resolution / Depends on units set < 2 Arc min + 1 Digit
Limits of error < 1 Arc min + 1 Digit
Interface RS485 / asynchron / 7 Bit / 2 Stop Bit / no parity / 9600 Baud
Power supply with batteries (lifetime) 1 x 1,5 V, Alakaline, size AA / 25 hrs
Option: 1 x 3 V, MnO2-Lithium, size AA / 55 hrs
Dimension Housing, Aluminium hard anodised 100 x 75 x 30 mm
Net weight 400 g incl. batteries
Temperature range
- Operating
- Storage 0 to 40°C
-20 to 70 °C.
CE conformity Fulfils emission and immunity standards

Wyler 015-PLUS-XG10 Clinotronic Plus Range +/- 10 degrees Accuracy <1 Arcmin