Starrett 567B Starrett Vee Block Clamp only Description : Starrett Vee Block Clamp

Item number:
567B
Details
Additional Details Description = Starrett Vee Block Clamp|
Starrett 653G Starrett granite stands Description : Granite dial gauge stand Stems : 8

Starrett 653G Starrett granite stands Description : Granite dial gauge stand Stems : 8" x 12" x 2" (200 x 300 x 50 mm)

Starrett S264WB Set of  Centre punches Description : Set of 7  Centre punches in wooden box

Starrett S264WB Set of Centre punches Description : Set of 7 Centre punches in wooden box

Starrett 567B Starrett Vee Block Clamp only Description : Starrett Vee Block Clamp

Availability: In stock
Item number
567B
€51.70 ex vat
€51.70 ex vat
Starrett & Ozar Vee Blocks
Ozar
Manufactured of hardened and precision ground tool steel
The sides are parallel and the vee is central and ground
Clamp is smaller than outside width of the vee block and has adjustable side screw for support
vee block has four 3/8-16 tapped holes two on the base and one on each side for angle iron clamping
Vee Block is provided with clamp

Starrett Precision V-Blocks and Clamps
Starrett V-blocks come in a variety of styles to suit the numerous requirements of machinists.
They are for general shop use and layout work as well as for holding stock in place during light-duty milling drilling and grinding operations.
All the clamp screws have a hole to help secure the workpiece.
No. 567 V-Block and Clamp
This is an improved V-block and clamp which has these very versatile features:
Can be used on its base on the end or on either side
The clamp is smaller than the outside width of the block but has an adjustable side screw to support the block and prevent tilting
The V at the stepped end is at right angles to the base and is handy for holding shouldered studs pins etc.
A clearance hole for drilling or removing dowel pins is provided in the block
The block has four 3/8-16 tapped holes two in the base and one on each side for attachment to an angle iron.
The angle iron holding the block can then be attached to a lathe faceplate or held by a magnetic chuck
The block is hardened and precision ground.
The sides are parallel and the V is central and parallel to the sides and base
The clamp is a strong forging



€51.70 ex vat