Phynix 10545 Paint Thickness Gauge Surfix easy Design Integrated Probe Measuring range iron/steel 0 – 3.500 µm Accuracy ± 2 µm + 2% of value(higher value is applied) Resolution 0 – 1.000 µm: 1 µm / 1.000 – 2.500 µm: 2 µm / 2.500 – 3.500 µm: 5 µm
| Additional Details | Design =Integrated Probe| Measuring range iron/steel =0 – 3.500 µm| Accuracy =± 2 µm + 2% of value(higher value is applied)| Resolution =0 – 1.000 µm: 1 µm / 1.000 – 2.500 µm: 2 µm / 2.500 – 3.500 µm: 5 µm| Carbide pole tip =•| Calibration =Factory-, zero calibration| Statistics =Average, standard deviation, minimum, maximum| Display =4-digit alphanumeric, height 8 mm| Operating temperature =0° C to + 60 °C| Surface temperature =–15 °C to + 60 °C| Dimensions (gauge) =110 mm x 50 mm x 25 mm| Dimensions (probe)= Integrated| Weight =90 g incl. batteries| Protection class =IP 52 (protection against dust and dripping water)| Standards =DIN, ISO, ASTM, BS| Recommended application =Compact device| Warranty= 2 years| |
|---|
Phynix 10545 Paint Thickness Gauge Surfix easy Design Integrated Probe Measuring range iron/steel 0 – 3.500 µm Accuracy ± 2 µm + 2% of value(higher value is applied) Resolution 0 – 1.000 µm: 1 µm / 1.000 – 2.500 µm: 2 µm / 2.500 – 3.500 µm: 5 µm
The handy Surfix® easy I-F is a universally applicable coating thickness measurement gauge, which is suitable for the rough use in the production as well as in the laboratory. It allows for calibration free measurements on steel/iron. When performing difficult measuring tasks the calibration function is available. Integrated online statistics allow for an easy analysis of the gathered data.
The measuring probes of the Surfix® easy series have a highly wear-resistent carbide pole tip and therefore almost unlimited durability. The plastic foot is equipped with a v-groove and ensures an upright positioning even on cylindrical or curvatured surfaces.
The Surfix® easy I-F is ideal for users, who are looking for a simple way of coating thickness measurement without giving up on statistics, a hard-wearing pole tip and quality „Made in Germany“.
The Surfix® easy I-F operates with the proven magnetic inductive measuring principle according to DIN EN ISO 2178.It provides high accuracy even on thin coatings combined with easy handling. Switch on and measure, as easy and universal as it gets.
Application areas
The Surfix® easy I-F is ideal for users, who are looking for a simple way of coating thickness measurement without giving up on statistics, a hard-wearing pole tip and quality „Made in Germany“. The gauges are used e.g. in:
- Paint shops
- Paint and powder-coatings
- Repair shops and experts
- Steel industry
- Automotive industry
- Ship building industry
- Incoming goods
- Quality management during productions
- Final inspection
- Laboratory
Advantages at a glance
- Innovative and user friendly measurement technology: switch on and measure
- Measurements on even, rough and curvatured surfaces
- Measurements on steel/iron
- Automatic recognition of the base material
- Easy detection of zinc layers under coatings
- Calibration-free measurements
- Online-statistics (N, x, s, Min, Max)
- Big surface for safe positioning
- Acustic signal after measuring
- Selectable µm/mils
- Producer inspection certificate
- Integrated probe
- 2 years warranty
Technical specifications Surfx® easy I-F – 10545
| Design | Integrated Probe |
| Measuring range iron/steel | 0 – 3.500 µm |
| Accuracy | ± 2 µm + 2% of value(higher value is applied) |
| Resolution | 0 – 1.000 µm: 1 µm / 1.000 – 2.500 µm: 2 µm / 2.500 – 3.500 µm: 5 µm |
| Carbide pole tip | • |
| Calibration | Factory-, zero calibration |
| Statistics | Average, standard deviation, minimum, maximum |
| Display | 4-digit alphanumeric, height 8 mm |
| Operating temperature | 0° C to + 60 °C |
| Surface temperature | –15 °C to + 60 °C |
| Dimensions (gauge) | 110 mm x 50 mm x 25 mm |
| Dimensions (probe) | Integrated |
| Weight | 90 g incl. batteries |
| Protection class | IP 52 (protection against dust and dripping water) |
| Standards | DIN, ISO, ASTM, BS |
| Recommended application | Compact device |
| Warranty | 2 years |
Limit values
| Smallest curvature radius for convex surfaces | 5 mm |
| Smallest curvature radius for concave surfaces | 50 mm |
| Smallest operation height | 125 mm |
| Smallest measurement area | 10 x 10 mm |
| Smallest base material thickness – F | 0.5 mm |
Scope of delivery
Gauge Surfix® easy I-F
Protective rubber cover
Control foil
Steel zero-standard
Carrying case
2 batteries AAA
Producer inspection certificate
Instruction manual
