Martin Tschopp 501-11 Thread measuring wires with micrometer holder Diameter : 1.10mm/.04331'' Accuracy : 0.001mm/.00005'' Micrometer Spindle : 6 35mm For 1.75mm & 14TPI & 13TPI pitch

Item number:
501-11
Details
Additional Details Description = Thread measuring wires with micrometer holder|Diameter Metric= 1.10mm| Diameter Inch=.04331''|Accuracy = 0.001mm/.00005''|Micrometer Spindle = 6 35mm| Pitch=1.75mm & 14TPI & 13TPI|
Martin Tschopp 501-10 Thread measuring wires with micrometer holder Diameter : 0.895mm/.03524''  Accuracy : 0.001mm/.00005'' Micrometer Spindle : 6 35mm  For 1.00mm & 16tpi, 18tpi and1.5mm pitch

Martin Tschopp 501-10 Thread measuring wires with micrometer holder Diameter : 0.895mm/.03524'' Accuracy : 0.001mm/.00005'' Micrometer Spindle : 6 35mm For 1.00mm & 16tpi, 18tpi and1.5mm pitch

Martin Tschopp 501-12 Thread measuring wires with micrometer holder Diameter : 1.35mm/.05315''  Accuracy : 0.001mm/.00005'' Micrometer Spindle : 6 35mm  For 2.00mm & 12TPI & 11TPI pitch

Martin Tschopp 501-12 Thread measuring wires with micrometer holder Diameter : 1.35mm/.05315'' Accuracy : 0.001mm/.00005'' Micrometer Spindle : 6 35mm For 2.00mm & 12TPI & 11TPI pitch

Martin Tschopp 501-11 Thread measuring wires with micrometer holder Diameter : 1.10mm/.04331'' Accuracy : 0.001mm/.00005'' Micrometer Spindle : 6 35mm For 1.75mm & 14TPI & 13TPI pitch

Availability: In stock
Item number
501-11
€120.00 ex vat
€120.00 ex vat
Thread Measuring Wires with micrometer holders
The three-wire measuring process is one of the most precise procedures for determining the pitch diameter of threads.
The M+T thread measuring wires with micrometer holders combine this procedure with unique handling ease measuring security of the highest order and absolute efficiency.
The corresponding measuring wires position themselves after they have been affixed through the integrated washer springs to the spindle of the measuring screw using the pair of holders.
For classic handling applications we can also supply thread measuring wires with labelled eyelet handles in plastic.
Our thread measuring wires with labelled micrometer holders are available (may depend on version):
- In the diameters of the measuring wire series in accordance with Zeiss or all other diameters from 0.15 mm to 6.50 mm
- In the diameter accuracy
















In the interests of simplicity, corrections for possible deformation of the measuring wires and measurement uncertainty are not taken into account in the following tables.

Thread P
[mm]
d2 max.
[mm]
d2 min.
[mm]
α
[°]
dD
[mm]

M1 max.
[mm]
M1 min.
[mm]
δ
[mm]
M2 max.
[mm]
M2 min.
[mm]
M2 - d2
[mm]

 

Determining the flank diameter d2 using the measured test dimension M:
By reversing the calculation bases shown above it is possible to calculate the flank diameter for a known thread specification on the basis of the measured test dimension M. The following table may be used (assumptions and calculation bases as above).

ThreadP
[mm]
α
[°]
dD
[mm]
M [mm]
measured
d2 [mm]
w/o δ
δ
[mm]
d2 [mm]
with δ

Martin Tschopp 501-11 Thread measuring wires with micrometer holder Diameter : 1.10mm/.04331''
€120.00 ex vat