Mark-10 F105 Mark 10 Advanced Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 100 lbF / 0.5 kN
Item number:
F105
| Additional Details | Load capacity*: =100 lbF| Maximum travel: =18.0 in [457 mm]| Speed range: =0.02 - 45 in/min [0.5 - 1,100 mm/min]| Load accuracy= (% of full scale) | Test frame:=±0.1%| Force sensor alone: =Series FS05: ±0.1% | Load sampling rate: =20,000 Hz| Data acquisition rate: =1,000 Hz| Speed accuracy:= ±0.2% of setting, virtually no variation with load| Distance accuracy: =±0.002 in [0.05 mm], factory-compensated at up to full load| Distance resolution: =0.0005 in [0.01 mm]| Limit switch repeatability: =±0.001 in [0.03 mm]| Power: =Universal input 100-240 VAC, 50/60 Hz, 300W| Fuse type: =1.2 A, 250V, 3AG, SLO BLO| Weight (test frame only): =60 lb [27 kg]| Shipping weight: =75 lb [34 kg] | Environmental conditions: = Indoor use only Up to 6,500 ft [2,000 m] above sea level| Temperature range:= 40 - 95°F [5 - 35°C]| Humidity range: =up to 80% relative humidity at 31°C, decreasing linearly to 50% relative humidity at 40°C, non-condensing| Mains supply voltage fluctuations up to= ±10 % of the nominal voltage| Transient overvoltages= up to the levels of Overvoltage Category II| Use in environments =up to Pollution Degree 2| Conformance: =CE| |
|---|
Mark-10 F105 Mark 10 Advanced Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 100 lbF / 0.5 kN
Availability:
In stock
Item number
F105
€9,950.00
ex vat
€9,950.00
ex vat
This family of force testers is designed for tension and compression force testing applications, with force capacities up to 500 lbF (2.2 kN). Select from vertical or horizontal orientations, along with a broad range of force sensor capacities and an expansive array of grips and fixtures.
Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.
Rigid and precise by design Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
Conveniently modular
Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.
External limit switches
Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Seamless force sensor interface
Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale.
Series R07 S-beam type force sensors accommodate higher force ranges, also compatible with Plug & Test® technology. Ranges available from 50 to 1,500 lbF [250 N to 7.5 kN]. Accurate to ±0.15% of full scale.
Set up tests, record data, and analyze data via IntelliMESUR® software. From basic tests to multi-step sequencing, IntelliMESUR® is fully integrated with Series F systems. Select from a pre-configured tablet control panel or standalone software for your own Windows device.
Rigid and precise by design Exceptionally rigid frames feature custom extrusion designs, engineered for stiffness. Factory compensation of test frames and force sensors ensure position accuracy of ±0.002 in / 0.05 mm under any load, at any position.
Stepper motors and controllers drive a ball screw and linear guideway for smooth, quiet operation, with virtually no speed variation under load.
Conveniently modular
Frame bases can be removed to accommodate column extensions and alternative mounting configurations. Most electronics are housed in a self-contained enclosure, easily accessed and replaced if needed. Integrated T-slots along the column accommodate add-ons.
External limit switches
Solid-state upper and lower limit switches may be used as test limits or as test exceptions. Dual-graduated rulers aid in switch placement.
Seamless force sensor interface
Series FS05 smart force sensors mount directly to the crosshead of models F105, F305, F505, and F505H, without any connection cables. Ranges available from 0.12 to 500 lbF [0.5 N to 2.5 kN]. Accurate to ±0.1% of full scale.
Series R07 S-beam type force sensors accommodate higher force ranges, also compatible with Plug & Test® technology. Ranges available from 50 to 1,500 lbF [250 N to 7.5 kN]. Accurate to ±0.15% of full scale.
Mark-10 F105 Mark 10 Advanced Test frame with IntelliMESUR® pre-loaded tablet control panel, vertical, 100 lbF / 0.5 kN
Check items to add to the cart or
![Mark-10 ESM303H Mark 10 Test Stands Description :ESM303H Motorized Test Stands With PC Control, horizontal force tester for tension and compression measurement applications up to 300 lbF [1.5 kN]](https://inspection.ie/media/catalog/product/cache/8e0bcd481e565c92762c33465e474b7a/e/s/esm303h-force_measurement_limit-switch-g.png)
![Mark-10 ESM303 Mark 10 Test Stands Description :ESM303 Motorized Test Stands With PC Control, Vertical force tester for tension and compression measurement applications up to 300 lbF [1.5 kN]](https://inspection.ie/media/catalog/product/cache/8e0bcd481e565c92762c33465e474b7a/e/s/esm303-with-force-grips-g1061.png)
