Rubert SH-6 SH-6 Shot-Blast Microfinish Comparator Description : There are six replicated shot-blasted surface finish specimens ranging from 32-1000 micro".
Item number:
SH-6
| Additional Details | Description = There are six replicated shot-blasted surface finish specimens ranging from 32-1000 micro.|" |
|---|
GAR SH-6 Shot-Blast Microfinish Comparator Description : There are six replicated shot-blasted surface finish specimens ranging from 32-1000 micro".
Availability:
In stock
Item number
SH-6
SH-6 Shot-Blast Microfinish Comparator
The SH-6 MICROFINISH COMPARATOR Surface Roughness Scale is made by a dual electroforming process wherein nickel is electrodeposited to provide an exact reproduction in intricate detail. The same electroforming process used to produce the Surface Roughness Scale is available from GAR Electroforming to serve your product needs. The surfaces used in this scale are reproductions of accurately shot-blasted surfaces measured in microinches (millionths of an inch - 0.000001"). The numbers engraved alongside each surface are the average deviation from the mean surface expressed in microinches. The SH-6 MICROFINISH COMPARATOR Surface Roughness Scale provides industry with established flat surface roughness specimens for visual and tactual comparison.
It is used in specifying and controlling surface roughness when a product having the appearance of typically shot-blasted surfaces is required. The SH-6 MICROFINISH COMPARATOR Surface Roughness Scale provides an economical tool which permits roughness to be specified on the same basis as linear measurements. The surfaces presented are the result of years of research and engineering. Details covering this subject are now published in The American National Standards Institute (ANSI) specification titled: "Surface Texture Surface Roughness Waviness and Lay." ANSI/ASME B46.1
The SH-6 MICROFINISH COMPARATOR Surface Roughness Scale is made by a dual electroforming process wherein nickel is electrodeposited to provide an exact reproduction in intricate detail. The same electroforming process used to produce the Surface Roughness Scale is available from GAR Electroforming to serve your product needs. The surfaces used in this scale are reproductions of accurately shot-blasted surfaces measured in microinches (millionths of an inch - 0.000001"). The numbers engraved alongside each surface are the average deviation from the mean surface expressed in microinches. The SH-6 MICROFINISH COMPARATOR Surface Roughness Scale provides industry with established flat surface roughness specimens for visual and tactual comparison.
It is used in specifying and controlling surface roughness when a product having the appearance of typically shot-blasted surfaces is required. The SH-6 MICROFINISH COMPARATOR Surface Roughness Scale provides an economical tool which permits roughness to be specified on the same basis as linear measurements. The surfaces presented are the result of years of research and engineering. Details covering this subject are now published in The American National Standards Institute (ANSI) specification titled: "Surface Texture Surface Roughness Waviness and Lay." ANSI/ASME B46.1
