-
Mark 10 G1086 Coefficient of Friction Fixture. High Capacity Clevis Grip 2,000 lbF (9 kN) capacity Maximum sled travel: 10.5 in (265 mm)
€1,595.00 -
Mark-10 G1038 Medium hook, #10-32M Capacity 200lbF 1,000 N
€15.00 -
Mark-10 G1035 Large hook, 5/16-18M Capacity lbF 500, [N] [2500]
€20.00 -
Mark-10 G1042 Extra-large hook, 1/2-20M Capacity lbF 1000, [N] [4500]
€30.00 -
Mark-10 G1107 Snap hook, 5/16-18F Capacity 500 lbF [2500 N]
€95.00 -
Mark 10 G1029 Flat Heads Capacity 200lbF [1,000] [N] Flat attachment, #10-32F
€20.00 -
Mark-10 G1024-1 Extension Rods For use between a force gauge and another attachment or grip. Cap. 200lb, 1[N], Length 1.0''[25.4]mm, ØB 0.25''/6.4mm, C=#10-32F thread, D=#10-32M
€20.00 -
Mark-10 G1031 Extension Rods For use between a force gauge and another attachment or grip. Cap. 500lb, 2500[N], Length 5.0''[127.0]mm, ØB 0.5''/12.8mm, C & D Threads 5/16-18F, 5/16-18M
€20.00 -
Mark-10 G1031-1 Extension Rods For use between a force gauge and another attachment or grip. Cap. 500lb, 2500[N], Length 2.0''[50.0]mm, ØB 0.5''/12.8mm, C & D Threads 5/16-18F, 5/16-18M
€20.00 -
Mark-10 G1031-2 Extension Rods For use between a force gauge and another attachment or grip. Cap. 500lb, 2500[N], Length 1.0''[25.4]mm, ØB 0.5''/12.8mm, C & D Threads 5/16-18F, 5/16-18M
€20.00 -
Mark 10 G1110 Puncture Fixture, Conforms to ASTM D5748 1,000 lbF (5 kN) capacity
€2,550.00 -
Mark 10 G1097 Upper anvil for bend fixture bases, 2,000 lbF
€160.00 -
Mark-10 G1071 TAPPI T829 Score Bend Fixture, Maximum force: 50 lbF (250 N)
€750.00 -
Mark-10 G1072 Opening Force Fixture. Maximum force: 50 lbF (250 N) Mounts directly to the following test stands: ESM303, ESM750, ESM1500, ES30, TSC1000, TSF, TSFM500, ES10/ES20 (when ordered with optional AC1060 mounting plate). A motorized test stand is
€425.00 -
Mark-10 G1105 Cork Extraction Fixture Conforms to ISO 9727 Accommodates up to 1.5 L bottles 200 lbF (1 kN) capacity
€1,250.00 -
Mark-10 G1098 Loop Tack Fixture Adhesive tack testing Test strip with three 1 in2 (25 mm2) test areas Conforms to ASTM D6195 100 lbF (500 N) capacity
€750.00 -
Mark-10 G1104 Flip Cap Pull Grip Capacity 20 lbF [100 N]
€160.00 -
Mark-10 G1092 Wire / Rope Grip, Bollard Style, High Capacity, Capacity lbs 2000, 9[kN]
€800.00 -
Mark10 G1094 Eccentric Roller Grip Max. sample size: 1.25 in thick x 2.36 in wide (32 x 60 mm) Eye end mounting 2,000 lbF (9 kN) capacity
€950.00 -
Mark 10 G1095 Bend Fixtures 3-point and 4-point bend testing – mix and match upper and lower fixtures Conform to ASTM C393, C1161, D790 500 lbF (2.5 kN) capacity
€895.00 -
Mark 10 G1096 Bend Fixtures 3-point and 4-point bend testing – mix and match upper and lower fixtures Conform to ASTM C393, C1161, D790 2,000 lbF (10 kN) capacity
€1,150.00 -
Mark-10 G1025 Chisel Points #10-32F, Capacity 200lbF 1000[N]
€20.00 -
Mark-10 G1032 Chisel attachment, 5/16-18F, Capacity 500lbF 2500[N]
€20.00 -
Mark-10 G1026 Cone attachment, #10-32F, Capacity 200lbF 1000[N]
€20.00 -
Mark 10 09-1166 Analogue cable, gauge to dual banana plug Series 7, 5, 4, TT01, TT02, TT05, WT3-201(M) instruments, 6'
€80.00 -
Mark 10 09-1056 Serial cable, test stand controller to RS-232 DB9 ESM301(L), ESMH-DC, TSFM500(H)-DC, ESMH-DC, TSTM(H)-DC test stands, 10'
€30.00 -
Mark 10 09-1180 Cable, set point / overload protection, gauge to test stand Series 7, 5, 4 instruments with ESM, TSFM500, ESMH, TSTM test stands, coiled, 28" retracted
€185.00 -
Mark 10 09-1048A Cable, serial, gauge to RS-232 DB-9 Series BG, CG, EG, CT, ST, CTA, STA, Model BGI instruments, 6'
€80.00 -
Mark 10 09-1049 Cable, analog, gauge to dual banana plug Series BG, CG, EG, Model BGI instruments, 6'
€80.00 -
Mark 10 AC1051 Footswitch For Series 7 / 7i
€185.00