Mitutoyo 544-532 Ultra High Accuracy Laser Scan Micrometer 500S 0.005-2mm / .0002-0.08"

Item number:
544-532
Details
Number of Scans 3200/sec
Protection level IP64
Laser scanning rate 2992in/s 76m/s
Measuring region .04x.08in 1x2mm
Applicable display unit LSM-6200
Linearity .000012in 0.3µm
Measuring Range .0002-0.08in 0.005-2mm
Part Number 544-532
video

Repeatability with Laser Micrometer

Additional Details Resolution=0.00001-0.01mm / .000001-.0005" selectable|Scanning Speed =76m/s|Protection standards=FDA, IEC|
Mitutoyo 544-496E Ultra High Accuracy Laser Scan Mic and Display 902/6900 0.1-25mm / .004-1

Mitutoyo 544-496E Ultra High Accuracy Laser Scan Mic and Display 902/6900 0.1-25mm / .004-1"

Mitutoyo 544-534 Mitutoyo Laser Micrometer  LSM-501S , Measuring Range : 0.05-10mm/0.002-0.4

Mitutoyo 544-534 Mitutoyo Laser Micrometer LSM-501S , Measuring Range : 0.05-10mm/0.002-0.4" Resolution (Selectable) : 0.00001-0.01mm/0.000001-0.0005" Repeatability : .............Note Display LSM-6200, 544-072E Should be ordered with this unit

Mitutoyo 544-532 Ultra High Accuracy Laser Scan Micrometer LSM-500S 0.005-2mm / .0002-0.08", IP64 Rating..................Note 544-072E should be ordered with this unit.

Availability: In stock
Item number
544-532
€6,000.00 ex vat
€6,000.00 ex vat

Mitutoyo Laser Micrometers LSM-500S
High speed scanning
- Suitable for in line measurements
- Visible and invisible laser types available
- Supplied with individual I.D. unit to compensate for optical errors when connected to the chosen display unit
- Can be used with either LSM5000/6000 display units (optional)
- Calibrated Gauge set 02 AGD150 (optional)
- IP64 protected level


 

Laser Scan Micrometer LSM-500S Series 544-High Accuracy Non-contact Measuring System

Series 544
FEATURES
[*1]: Measuring range available when set to "No extra-fine wire measurement"or "Edge specification" in the basic setup mode.
[*2]: Environment for accuracy validation: 20ºC 1ºC temperature; 50% 10% humidity. 
[*3]: The value of 2 o with a 2mm-diameter gage has been measured for two minutes with a measurement interval of 0.32 seconds, where is the standard deviation.
[*4]: The value of measurements in the center of the measurement region.
[*5]: Error due to the positional shift of the workpiece in the optical axis direction or scanning direction
[*6]: Averaging scans between 1 and 8 times can be made if "No extra-fine wire measurement" is specified in the basic setup mode.
The measuring range, however, is limited to 0.1mm to 2mm in this case
Mitutoyo 544-532 Ultra High Accuracy Laser Scan Micrometer 500S 0.005-2mm / .0002-0.08"
€6,000.00 ex vat
Product Accessories