Mitutoyo 544-542 Mitutoyo Laser Micrometer LSM-516S Measuring Range : 1-160mm/0.4-6.3" Resolution : 0.0001-0.1mm/0.000005-0.005" Linearity

Item number:
544-542
Details
Number of Scans 3200/sec
Protection level IP64
Laser scanning rate 47480in/s 1206m/s
Measuring region 1.57x6.3in 40x160mm
Applicable display unit LSM-6200
Linearity .00028in 7µm
Measuring Range .04-6.3in 1-160mm
Part Number 544-542
Resolution .0001mm-.1mm/.000005"-.005"
video

Repeatability with Laser Micrometer

Additional Details Resolution = 0.0001-0.1mm/0.000005-0.005"|Accuracy narrow range=±(4 + 2 ∆D)µm [∆D:mm]| Scanning Speed=1206m/s|Scanning Speed =1206m/s|Protection standards=FDA, IEC|
Mitutoyo 544-540 Mitutoyo Laser Micrometer  LSM-512S Measuring Range : 1-120mm/0.04-4.72

Mitutoyo 544-540 Mitutoyo Laser Micrometer LSM-512S Measuring Range : 1-120mm/0.04-4.72" Resolution (Selectable) : 0.0001-0.1mm/0.000005-0.005" Repeatability :

Mitutoyo 544-047 LSM-5200 Display Unit Series 544-Compact Display Unit for real-time Multi-channel Measurement

Mitutoyo 544-047 LSM-5200 Display Unit Series 544-Compact Display Unit for real-time Multi-channel Measurement

Mitutoyo 544-542 Mitutoyo Laser Micrometer LSM-516S Measuring Range : 1-160mm/0.4-6.3" Resolution : 0.0001-0.1mm/0.000005-0.005" Linearity

Availability: In stock
Item number
544-542
€16,376.47 ex vat
€16,376.47 ex vat

Mitutoyo Laser Micrometers
High speed scanning
- Suitable for in line measurements
- Visible and invisible laser types available
- Supplied with individual I.D. unit to compensate for optical errors when connected to the chosen display unit
- Can be used with either LSM5000/6000 display units (optional)
- Calibrated Gauge set 02 AGD150 (optional)
- IP64 protected level

Laser Scan Micrometer LSM-500S Series 544-High Accuracy Non-contact Measuring System

Series 544
FEATURES
[*1]: Measuring range available when set to "No extra-fine wire measurement"or "Edge specification" in the basic setup mode.
[*2]: Environment for accuracy validation: 20ºC 1ºC temperature; 50% 10% humidity. 
[*3]: The value of 2 o with a 2mm-diameter gage has been measured for two minutes with a measurement interval of 0.32 seconds, where is the standard deviation.
[*4]: The value of measurements in the center of the measurement region.
[*5]: Error due to the positional shift of the workpiece in the optical axis direction or scanning direction
[*6]: Averaging scans between 1 and 8 times can be made if "No extra-fine wire measurement" is specified in the basic setup mode.
The measuring range, however, is limited to 0.1mm to 2mm in this case
Mitutoyo 544-542 Mitutoyo Laser Micrometer LSM-516S Measuring Range : 1-160mm/0.4-6.3" Resolution : 0.0001-0.1mm/0.000005-0.005" Linearity
€16,376.47 ex vat
Product Accessories