Mitutoyo 544-538 Mitutoyo Laser Micrometer No. : 544-538 Measuring Range : 1-60mm/0.04-2.36" Resolution (Selectable) : 0.00005-0.1mm/0.000002-0.005" Repeatability :
Item number:
544-538
| Number of Scans | 3200/sec |
|---|---|
| Protection level | IP64 |
| Laser scanning rate | 17795in/s 452m/s |
| Measuring region | .8x2.36in 20x60mm |
| Applicable display unit | LSM-6200 |
| Linearity | .00012in 3µm |
| Measuring Range | .04-2.36in 1-60mm |
| Part Number | 544-538 |
| video | Repeatability with Laser Micrometer |
| Additional Details | Resolution (Selectable) = 0.00005-0.1mm/0.000002-0.005"|Accuracy Narrow Range=±(1.5 + 0.5 ∆D)µm [∆D:mm]|Scanning Speed =452m/s|Protection standards=FDA, IEC| |
Mitutoyo 544-538 Laser Micrometer LSM-506S Measuring Range : 1-60mm/0.04-2.36" Resolution (Selectable) : 0.00005-0.1mm/0.000002-0.005" Repeatability :
Availability:
In stock
Item number
544-538
€7,500.00
ex vat
€7,500.00
ex vat
Mitutoyo Laser Micrometers
High speed scanning
- Suitable for in line measurements
- Visible and invisible laser types available
- Supplied with individual I.D. unit to compensate for optical errors when connected to the chosen display unit
- Can be used with either LSM5000/6000 display units (optional)
- Calibrated Gauge set 02 AGD150 (optional)
- IP64 protected level
Laser Scan Micrometer LSM-500S Series 544-High Accuracy Non-contact Measuring System
Series 544
FEATURES
[*1]: Measuring range available when set to "No extra-fine wire measurement"or "Edge specification" in the basic setup mode.[*2]: Environment for accuracy validation: 20ºC 1ºC temperature; 50% 10% humidity.
[*3]: The value of 2 o with a 2mm-diameter gage has been measured for two minutes with a measurement interval of 0.32 seconds, where is the standard deviation.
[*4]: The value of measurements in the center of the measurement region.
[*5]: Error due to the positional shift of the workpiece in the optical axis direction or scanning direction
[*6]: Averaging scans between 1 and 8 times can be made if "No extra-fine wire measurement" is specified in the basic setup mode.
The measuring range, however, is limited to 0.1mm to 2mm in this case
Mitutoyo 544-538 Laser Micrometer LSM-506S Measuring Range : 1-60mm/0.04-2.36" Resolution (Selectable) : 0.00005-0.1mm/0.000002-0.005" Repeatability :
Check items to add to the cart or
