Wyler 016-150-127-005 BLUESYSTEM SIGMA Level without Radio. Base Type 127 Horizontal cast iron base, flat, contact faces hand scraped, other surfaces chromium-plated, with magnetic inserts, sensitivity 5μm/m, Flat Base 150mm, With Magnets, Without Mounti
| Magnetic inserts | None |
|---|---|
| Limits of error full-scale | > 0.5 ME |
| Storage temperature | - 30 ... + 70 °C |
| Operating temperature | + 0 ... + 40 °C |
| Settle time | ca.5 seconds |
| Output | RS232 / RS485, asynchronous, 7 DataBits, 2 StopBits, no parity, 9600 bps |
| Battery | 2 x 1.5 V Alkaline |
| Housing | Cast iron rust protected |
| Remark | Base Type 127 Horizontal cast iron base, flat, contact faces hand scraped, other surfaces chromium-plated, with magnetic inserts |
| Measuring Range | ±100mm/m |
| External Indicating Unit | 016-004-002 BlueMETER SIGMA optional extra |
| Base Length Flat | 150mm |
| Base Type | Base Type 127 Horizontal cast iron base, flat, contact faces hand scraped, other surfaces chromium-plated, with magnetic inserts |
| Version | 127 |
| Scope of delivery | 1 BlueLEVEL 2 batteries 1.5V, size C 1 Infrared remote control (IR Zapper Blue) 2 batteries 1.5V, size AAA 1 manual 1 case |
| Responce Time | < 5 sec |
| Part Number | 016-150-127-005 |
| Model | BLUESYSTEM SIGMA |
| SPC Output | Yes |
| Radio | None |
| Sensitivity | 5 μm/m 1 arcsec |
| video |
Wyler 016-150-127-005 BLUESYSTEM SIGMA Level without Radio. Base Type 127 Horizontal cast iron base, flat, contact faces hand scraped, other surfaces chromium-plated, sensitivity 5μm/m, Flat Base 150mm, With Magnets, Without Mounting Holes
Wyler BlueSYSTEM Inclinometers
The BlueSYSTEM is a continuous further enhancement of the well known and well established measuring instruments MINILEVEL NT and LEVELTRONIC NT. A BlueSYSTEM normally consists of one or two measuring BlueLEVEL instruments and an indicating unit BlueMETER. Depending on the application, the BlueMETER can also be connected to a PC with evaluation software allowing the on-line SIGMA evaluation and presentation of the measured SIGMA values.
Features
• Compact design which is functionally optimised for precision measurement
• Radio data transmission based on the internationally approved Bluetooth™ standard (Option)
• Each instrument has its own specific address allowing the use of several independent systems in the same room without interfering with each other
• Since each instrument has a built in IR receiver, the measurement can be initiated from a distance
• Linearity according to DIN 2276
• All instruments are equipped with RS 232 / RS 422 / RS 485 interfaces
• Powered by standard 1.5 V batteries type "C"
• In compliance with CE regulations and all applicable EMC regulations
