Available in different throat depths, suitable for different measurement requirements.
In series J130, J138/L, and J142, measurement pressure is independent of the user, resulting in accurate readings of thickness without personal bias.
J138. 'Push Down Type' thickness gauge is particularly useful where fine measurement is not required - for example plywood. Pushing down the plunger with the index finger closes the measuring contacts.
Well-balanced frames and handgrips coupled with lightweight make these gauges easy to use for the measurement.
Available in different readings and travels.
Supplied with 10 mm anvil as standard. 20 mm and larger available on request.
For the American market, thickness gauges meeting the requirements of AGD standard available.
Technical Data Sheet
Type
Reading
Range
Graduation
Depth of Throat
J130/0
0.1mm
10.0mm
0-10
30mm
J130/3
0.01mm
10.0mm
0-100
30mm
J130/1
0.001inch
0.5inch
0-100
1.2inch
J130/6
0.002mm
2.0mm
0-20
30mm
J130/7
0.002mm
5.0mm
0-20
30mm
J130/8
0.0001inch
0.05inch
0-100
1.2inch
J130/9
0.0001inch
0.2inch
0-100
1.2inch
J142/0
0.1mm
10.0mm
0-10
100mm
J142/3
0.01mm
10.0mm
0-100
100mm
J142/1
0.001inch
0.5inch
0-100
4inch
J138/0
0.1mm
25.0mm
0-10
50mm
J138A/3
0.01mm
25.0mm
0-100
50mm
J138A/1
0.001inch
1.0inch
0-100
2inch
J138/OL
0.1mm
25.0mm
0-10
50mm
J138A/3L
0.01mm
25.0mm
0-100
50mm
J138A/1L
0.001inch
1.0inch
0-100
2inch
Baker Snap gauge K142/3 Grad. : 0.01mm Range : 0-10mm Throat Depth : 100mm Meas. Force : 1.4N Spindle : Flat Anvil : Flat Type : A